Dosimeter / radiometer DKS-96

Purpose:

• measurement of dose and ambient equivalent dose-rate (hereafter dose and dose-rate) H*(10) and H*(10) of continuous and pulsed gamma and X-ray radiation;
• measurement of alpha and beta radiation flux density;
• measurement of dose H*(10) and dose-rate H*(10) of neutron radiation;
• measurement of gamma radiation flux density;
• search and localization of radioactive sources and contaminations;
• measurement of gamma radiation flux density and dose-rate in boreholes and liquid media;
• radiation survey of territories with fixing of geographical coordinates using GPS sensor;
• control unit can be used as a pulse counter.

Features:

• automatic determination of detector type and selection of corresponding measurement modes;
• indication of several simultaneously measured quantities (for gamma and beta measurement channels of detector units BDKS-96c and BDZB-96b);
• indication of dynamic scale and signaling information attributable to the instrument’s status and all measured quantities (excess of thresholds, presence of external interference, battery status, etc.);
• A lot of alarm threshold settings – for dose and dose-rate (lower, upper warning and upper thresholds), for alpha and beta contaminations (flux densities);
• fast monitoring mode using three preset thresholds;
• convenient keyboard with direct access buttons for display illumination and for control of thresholds of the audible alarm;
• automatic selection of low or high sensitivity measurement mode of the BDMG-96 detector unit;
• “Search” and “detection” modes of operation allow to perform surveys in a more effective way and to prevent errors of the operator;
• USB interface for communication with personal computer;
• nonvolatile memory for 2000 measurement results (viewed on the display of the DKS-96 control unit or on the PC screen);
• measurement mode with background substraction.

Measurement modes

• measurements with user defined time interval;
• measurements with unlimited time and periodic upd ate of the measurement result (until the statistical error drops down to 6%);
• dose measurement (for gamma and neutron radiation);
• automatic – measurements with user defined time interval (1÷60 min) and archiving the results into memory;
• pulse count feature (DKS-96 counts pulses fr om the probe on 10, 30, 100, 300, 1000, 3000 second intervals);
• “Detect” and “Locate” modes for survey probes;
• threshold mode for estimation of measured radiation intensity in comparison with one, two or three thresholds and indication of both the numeric value and a corresponding message (“Excess”, “Normal”, “Clean”, “Clean!”).

Basic complete set:

• UIK-05 (UIK-05-01) or UIK-06 control unit (at the customer's option);
• probes (at the customer's option);
• case;
• passport and operation manual;

Optional equipment and service

• cable for connection to a computer;
• software;
• charge adapter CA-02C;
  
• headphones;
• matching unit MU-96;
• lightproof casings for BDZA and BDZB probes;
• expanding pole 0.7; 1.6; 4 m;
• GPS sensor.